• 1
  • 2
  • 3
  • 4
密  码:

Step-by-step guide to pole installation
Watch the video and study the following 14 steps pictorial which show you how to go about safely installing the X-Pole in your home. More detailed instructions are also available on the DVD and in the instruction Manual. Click here to watch the assembly video
Step 1 - Check the contents
Remove all the parts from the box, lay them out, identify them and check the contents.
Step 2 - Choose a Pole Dance location
Select a pole location, measure the ceiling height and place the base in postion.
Step 3 - Choose your extensions
Use the height chart to select any extensions (if required).
Step 4 - Locate the ceiling joists
Locate the ceiling joists by tapping with a finger or using a stud/joist locator. Put the base in position below the joist or joists you are going to use.
Step 5 - Fit the extensions to the base (if required)
Attach any extensions to base insert. Extensions always fit at the bottom of the pole smallest first.
Step 6 - Attach lower main pole.
Screw the lower main pole onto the extension or base insert. Tighten firmly by hand.
Step 7 - Fit adjuster cover
Slide adjuster cover into position just covering the O-ring.
Step 8 - Attach the Upper Dome
Slide the upper dome onto adjuster shaft. X-Pole uses a long adjuster shaft with 3 bearings to lock the dome at 90 degrees to the Pole.
Step 9 - Fit the pole tubes together
Attach upper pole assembly to lower pole. Screw up tightly and hold vertical.
Step 10 - Tighten Adjuster
Unscrew the adjuster by hand until it is firm against the ceiling. Make sure the upper dome is flat.
Step 11 - Tighten the tubes
Tighten the pole sections firmly but not over tight.
Step 12 - Final check
Tighten pole adjuster with spanner or rod until it is really firm. Check for movement and retighten if there is any movement.
Step 13 - Fit adjuster Cover
Slide the adjuster cover up, press in the two sprung pins and lock in place
Step 14 - Ready to go!
After a final check for movement X-pole is ready for use. Where ever it"s used X-Pole is up and ready for action in minutes.

X-Pole features
  • No ceiling fixings required
  • Articulating base - easy to set up on uneven floors
  • Static or spinning - uses 6 ball bearings, two hidden screws to lock/unlock
  • Double width pole support dome - covers 2 ceiling joists
  • 50mm (1.96”) Chromed Steel - as used by the professionals
  • Angular stability lock - helps stabilise your X-Pole
  • Expandable height - from 2235mm (7" 4") to 2745mm (9") straight from the box
  • Optional extensions - 6 lengths 100, 125, 250, 500, 750 and 1000mm
  • Screw together joints - for maximum strength, stability and smoothness
  • DVD included - together with comprehensive pictorial assembly instructions
  • Easy to use height adjuster - complete with cover
  • Multi functionality - with optional parts, use as a table or plasma screen mount
    image1 Screw together high precision joints, almost seamless
    X-Pole’s unique precision machined, screw together, connections (not slot together) create rock solid stability, extremely high pole strength and, more importantly for the dancer, smooth seams.
    image1 Low Profile Articulating base for uneven floors
    X-Pole has a uniquely designed, low profile (flat, not angled, so the dancers feet will not side off), non invasive base, which compensates for uneven floors. Also unique is it"s 3° angle lock which adds to X-Poles stability.
    image1 Static or spinning, easy to convert
    X-Poles converts from static to spinning mode in 15 seconds. Simply undo or re-tighten two hidden screws. Spinning units contain a total of 6 ball bearings for maximum stability and durability.
    image1 Extra wide support dome with easy to use height adjuster
    X-Poles extra wide 15" support dome creates a self locking moment for added stability. The upper adjuster, which is easy to tighten due to it"s fine thread, has a simple slide in place cover enhancing X-Poles appearance. (Cover not shown)
    X-Pole Set Contents

    X-Pole is supplied as a complete set including a 60 minute instructional DVD. The set contains all the parts needed to assemble a pole for heights from 2235~2745mm (88”~108”).

    With constant product development X-Pole is continually being improved and the lastest Chrome X-Poles are now supplied with 2x carry cases and a tool wallet. One carry case is for the pole tubes and will carry all the extensions you will need for a single pole. The other case, the round one, is for the Upper support and base. This new concept is lighter for transporation and easier to store.

    Items required but not supplied: Tape measure, ladders and optional stud finder to locate joists. See what is a stud finder? in FAQ’s.

    X-Pole Set
    1. 250mm Extension
    2. 125mm Extension
    3. Height Adjuster
    4. Adjuster Cover
    5. Main Pole A
    6. Main Pole B
    7. Pole Support Dome
    8. Articulating Base
    9. Carry Cases (x2)
    10. Wallet of X-Pole tools

    Click here to order your X Pole today
    Click here to order your X Pole today
    版权所有:X-Pole Asia Limited   苏ICP备16048803号-22
    邮箱:610381888@qq.com 联系人:丁小姐